PRODUCT DATA SHEET
04.03.2008
 

Otex - Adhesion Primer

Beskrivelse
Full-matt, quick drying special resin based adhesion primer.
Produktegenskaber
For priming and undercoating new and previously painted wooden, chipboard and wood fibre board surfaces. Adheres well also to problematic surfaces such as glass, tiles, glass fibre, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and catalytic paint.
Anbefalede anvendelser
Furniture, door, walls and interior window frames and exterior window frames painted with alkyd, polyurethane or catalytic paints.
MED

TEKNISKE DATA
Malingen er velegnet til vægge Malingen er velegnet til udvendige vægge Malingen er hel mat Malingen er fortynder-baseret Værktøj rulle Værktøj spray Værktøj pensel
Dækningen af ​​maling på ru overflader
8
m2/l
Dækningen af ​​maling på glatte overflader
10
m2/l
Base paints
AP og C
Farve Område
Tintable in shades marked with A and C on the Symphony Colour Card. Colour accuracy is not perfect. AP-base can be used as such or for tinting, C-base only for tinting.
Glans grad
Helmat
Byggemateriale emissionsklasse
MED
Dækning
8-10 m2/l.
Emballages størrelser
White: 1/3
Base paint AP: 0,9 l, 2,7 l, 9 l, 18 l.
Base paint C: 0,9 l, 2,7 l, 9 l
Fortynder
Spray Fortynder 1032 og Mineralsk terpentin 1050
Påførings metode
Methods: Brush, roller or spray. For airless spray application use a nozzle 0.011" - 0.015" i.e. 0.280 - 0.380 mm.
Thinning:  0 - 10 vol-%

Tørretid ved 23°C og 50% relativ luftfugttighed

Dust dry after 1 hour, sandable and recoatable on the following day.

Tørstof volumen
48 %
Densitet
1.4 kg/l white, ISO 2811
Produktkode
203_6201
MED-certifikat

PÅFØRING
Påførings-betingelser
The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %.
Male
Stir Otex well before use and thin, if necessary, for brush application with White Spirit 1050, and for spray application with Spray thinner 1032. Apply Otex by brush, roller or spray.

Otex adhesion primer levels well, so sanding is often unnecessary. When a very smooth surface is preferred sand with a fine dry sanding paper.
Rengøring af værktøj
Clean tools with White Spirit 1050 or Tikkurila Pensselipesu (Brush Cleaner).
Vedligeholdelsesvejledning
Avoid cleansing approx. 1 month after the painting work.
Clean surface with a neutral (pH 6-8) dishwashing agent and a soft brush, sponge or a dust rag.
Soiled surfaces can be cleansed with a cleaning tool using a neutral (pH 6-8) detergent. Rinse surface carefully after maintenance.


Handle the surface with care, ultimate durability and hardness is reached in approx. a moth under normal circumstances. If cleansing is needed, use a soft brush, a mop or a damp cleaning cloth.
EU VOC 2004/42/EC-limit værdi
EU VOC 2004/42/EC-limit value: (cat A/i) 500g/l (2010). Otex contains VOC max. 500g/l.

SUNDHED OG SIKKERHED KLASSIFICERING
Contains: Naphtha, hydrodesulfurized heavy, Solvent naphtha, light aromatic FLAMMABLE. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not breathe vapour/spray. Use only in well-ventilated areas. If swallowed, seek medical advice immediately and show this container or label. Do not empty into drains. Keep out of the reach of children. Contains methylethylketoxime. May produce an allergic reaction. A Material Safety Data Sheet is available on request.
Material Safety Data Sheet - OTEX Adhesion Primer

MILJØBESKYTTELSE OG BORTSKAFFELSE AF AFFALD
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
ADR: 3 III, Drums/vessels < 450 litres: not subject to ADR because of high viscosity
ssa040308 / ars260308 / tpi250308 / mpy261005 / 203-s