Tikkurila
PRODUCT DATA SHEET
13.03.2008
 

Luja Finishing Paint, semi-matt

Beskrivelse
M1 classified, semi gloss and semi matt Acrylate latex paint for interior painting. Luja Finishing Paint contains fungicide.
Produktegenskaber
For interior painting of concrete, plaster, filler treated, brick and various plate surfaces. Can be used for repainting surfaces previously treated with alkyd paint.
Anbefalede anvendelser
Interior walls and ceilings in humid premises, and premises in which high resistance to wear and tear is required such as lobbies, staircases , hospital corridors, patient rooms etc.

TEKNISKE DATA
Malingen er velegnet til vægge Malingen er halv-mat Malingen er vandbaseret Værktøj rulle Værktøj spray Værktøj pensel
Dækningen af ​​maling på ru overflader
5
m2/l
Dækningen af ​​maling på glatte overflader
8
m2/l
Base paints
A og C
Farve Område
Tikkurila Symphony Colour Card
Glans grad
Halvmat
Byggemateriale emissionsklasse
M1
Dækning
Approx. 5 - 8 m2/l. (When using the Luja method, minimum amount for two coats is 0,32kg/m2 = 7,5 m2/l )
Emballages størrelser
Base paint A: 0,9 l, 2,7 l, 9 l, 18 l.
Base paint C: 0,9 l, 2,7 l, 9 l.
Fortynder
Vand
Påførings metode
Brush, roller or spray. For airless spray application use nozzle 0.015" - 0.021" , Thinning: 0 - 5 vol-%

Tørretid ved 23°C og 50% relativ luftfugttighed
Touch dry in approx 2 hours. Re-coatable after approx. 4 hours.
Vaskbarhed
Very good. Resists over 10 000 scrubbings by brush, SFS 3755. Withstands washing with strong cleaning detergents and disinfectants used in hospitals.
Kemisk bestandighed
Resists solvents, e.g. White Spirit
Varme bestandighed
85 °C , ISO 4211-2 and ISO 4211-3
Tørstof volumen
Approx. 40 %
Densitet
1.2 kg/l, ISO 2811
Opbevaring
Protect from frost.
Produktkode
804/5_6001/3
MED-certifikat

PÅFØRING
Påførings-betingelser
The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %.
Forberedelse
Unpainted surfaces:
Remove dirt and dust from the unpainted surfaces. If necessary, fill holes and cracks with suitable Tikkurila Presto filler or Tikkurila Spakkeli filler. Sand the filler and remove sanding dust. Prime with Luja Universal Primer.

Previously painted surfaces:
Wash down previously painted surfaces with Cleaning Agent (Maalipesu) or Mould Removal (Homeenpoisto) according to instructions of use and let it dry. Remove loose, flaking paint with a scraper. Sand hard, glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Luja Universal Primer, if necessary.
Male
Stir Luja finishing paint well before use. Apply two finishing coats by brush, roller or spray.
Rengøring af værktøj
Clean tools with water. Use of Tikkurila Pensselipesu (Brush Cleaner) is recommended to be used to remove a bit harden paint from the brush.
Vedligeholdelsesvejledning
Cleanse the surfaces with neutral (pH 6-8) detergent with soft brush, sponge or cloth at the earliest 1 month after painting Very dirty surfaces can be cleansed with lightly alkaline (pH 8-10) detergent with cloth, mop or sponge. Rinse the surfaces after cleaning carefully. Follow the dilution instructions of the detergent manufacturer.
Be careful with the painted surfaces during few weeks time, because the paint will achieve its final hardness and durability in normal conditions after 1 month. If the surfaces must be cleansed soon after painting, cleanse the surface lightly with soft brush, cloth or mop.
Vedligeholdelsesbehandling
Surfaces painted with Luja Finishing paint can be repainted with similar water-borne paint.
EU VOC 2004/42/EC-limit værdi
(cat A/a) 75g/l (2007)/ 30g/l(2010). Luja Finishing Paint Semi-matt contains VOC max. 75g/l.

SUNDHED OG SIKKERHED KLASSIFICERING
The product is not classified as dangerous. A Material Safety Data Sheet is available on request.
Material Safety Data Sheet - LUJA Finishing Paint

MILJØBESKYTTELSE OG BORTSKAFFELSE AF AFFALD
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
ADR: not classified
ssa130308 / mli080906 / jjh110906 / ars070408 / 804, 805-s