Solvent free co-polymer emulsion that resists cleaning and dries to a superfine matt finish with a slight sheen.
Joker is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard, wallpaper and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces as well as for surfaces previously treated with alkyd paint according to instructions.
For painting ceilings and walls in living rooms, bedrooms and children’s rooms, as well as halls and kitchens and other similar dry premises. Joker resists cleaning.
Tintable in shades of the Tikkurila Symphony colour card. Small amounts of auxiliary solvents are added to the tinted products.
10 - 12 m2/l for absorbing surfaces. 7 -9 m2/l for
A and C base paints 0,225 l, 0,9 l, 2,7 l, 9 l, Base paint A also in 18 l can.
Brush, roller or spray. For airless spray application, use a nozzle
0.015” – 0.021”. Thinning: If necessary thin up to 10% with water
Tørretid ved 23°C og 50% relativ luftfugttighed
Dust dry after 1/2 hour, re-coatable after 1-2 hours.
Resists over 5000 brushings.
Resists cleaning detergents and weak solvents e.g. White Spirit.
85°C ISO 4211-3
Approx. 40% depending on the colour shade
Approx 1.3 kg/l depending on the colour shade, ISO 2811
Protect from frost.
The surface to be painted must be dry, the temperature of the air at least 5 ˚C, and the relative humidity of the air below 80 %.
Clean dirt and dust from the unpainted surfaces. Level the surface with Spakkeli or Presto filler, if needed, and sand the dried surface. Remove sanding dust. Paint directly with Joker or prime with Luja universal primer.
Previously painted surfaces: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Sand down hard, glossy and with alkyd paint treated surfaces matt. Remove sanding dust. Fill cracks and holes with Spakkeli or Presto filler and sand the dried surface. Remove sanding dust. If priming is needed, use e.g Luja Universal Primer before coating.
Stir Joker well before use and thin with water, if necessary. Apply by brush, roller or spray 1-2 times.
Rengøring af værktøj
Clean tools with water and soap. Tikkurila's Pensselipesu (Tool Cleaner) is recommended for cleaning hardened paint.
EU VOC 2004/42/EC-limit værdi
(cat A/a) 30g/l(2010)
SUNDHED OG SIKKERHED KLASSIFICERING
Not classified as hazardous for health.
Handle with care. Avoid prolonged contact with skin and breathing of spray mist.
Material Safety Data Sheet available on request.
Material Safety Data Sheet - Joker
MILJØBESKYTTELSE OG BORTSKAFFELSE AF AFFALD
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste.