Tikkurila
PRODUCT DATA SHEET
13.01.2006
 

Joker

Beskrivelse
Solvent free co-polymer emulsion that resists cleaning and dries to a superfine matt finish with a slight sheen.
Produktegenskaber
Joker is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard, wallpaper and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces as well as for surfaces previously treated with alkyd paint according to instructions.
Anbefalede anvendelser
For painting ceilings and walls in living rooms, bedrooms and children’s rooms, as well as halls and kitchens and other similar dry premises. Joker resists cleaning.

TEKNISKE DATA
Malingen er velegnet til vægge Malingen er mat Malingen er vandbaseret Værktøj rulle Værktøj spray Værktøj pensel
Dækningen af ​​maling på ru overflader
7
m2/l
Dækningen af ​​maling på glatte overflader
12
m2/l
Base paints
A og C
Farve Område
Tintable in shades of the Tikkurila Symphony colour card. Small amounts of auxiliary solvents are added to the tinted products.
Glans grad
Mat
Byggemateriale emissionsklasse
M1
Dækning

10 - 12 m2/l for absorbing surfaces. 7 -9 m2/l for non-absorbing surfaces.

Emballages størrelser
A and C base paints 0,225 l, 0,9 l, 2,7 l, 9 l, Base paint A also in 18 l can.
Fortynder
Vand
Påførings metode

Brush, roller or spray. For airless spray application, use a nozzle 0.015” – 0.021”. Thinning: If necessary thin up to 10% with water

Tørretid ved 23°C og 50% relativ luftfugttighed

Dust dry after 1/2 hour, re-coatable after 1-2 hours.

Vaskbarhed
Resists over 5000 brushings.
Kemisk bestandighed
Resists cleaning detergents and weak solvents e.g. White Spirit.
Varme bestandighed
85°C ISO 4211-3
Tørstof volumen
Approx. 40% depending on the colour shade
Densitet
Approx 1.3 kg/l depending on the colour shade, ISO 2811
Opbevaring
Protect from frost.
Produktkode
878_6001/3
MED-certifikat

PÅFØRING
Påførings-betingelser
The surface to be painted must be dry, the temperature of the air at least 5 ˚C, and the relative humidity of the air below 80 %.
Forberedelse
New surfaces:
Clean dirt and dust from the unpainted surfaces. Level the surface with Spakkeli or Presto filler, if needed, and sand the dried surface. Remove sanding dust. Paint directly with Joker or prime with Luja universal primer.

Previously painted surfaces: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Sand down hard, glossy and with alkyd paint treated surfaces matt. Remove sanding dust. Fill cracks and holes with Spakkeli or Presto filler and sand the dried surface. Remove sanding dust. If priming is needed, use e.g Luja Universal Primer before coating.
Male
Stir Joker well before use and thin with water, if necessary. Apply by brush, roller or spray 1-2 times.
Rengøring af værktøj
Clean tools with water and soap. Tikkurila's Pensselipesu (Tool Cleaner) is recommended for cleaning hardened paint.
EU VOC 2004/42/EC-limit værdi
(cat A/a) 30g/l(2010)

SUNDHED OG SIKKERHED KLASSIFICERING
Not classified as hazardous for health. Handle with care. Avoid prolonged contact with skin and breathing of spray mist. Material Safety Data Sheet available on request.
Material Safety Data Sheet - Joker

MILJØBESKYTTELSE OG BORTSKAFFELSE AF AFFALD
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste.
TRANSPORT
VAK/ADR -
mke130106 / mpy130106 /