PRODUCT DATA SHEET
13.03.2008
 

Feelings Extra Durable Paint, semi-matt

Beskrivelse
Waterborne acrylate latex finishing paint for use on interior walls and ceilings.
Produktegenskaber
Plaster, concrete, brick, building block and boards, MDF, etc.
Anbefalede anvendelser
Feelings Extra Durable can be used on primed wood, metal, and for repainting interior surfaces previously coated with waterborne, alkyd or acid catalysed paints.
MED

TEKNISKE DATA
Malingen er velegnet til vægge Malingen er halv-mat Malingen er vandbaseret Værktøj rulle Værktøj spray Værktøj pensel
Dækningen af ​​maling på ru overflader
5
m2/l
Dækningen af ​​maling på glatte overflader
8
m2/l
Base paints
A og C
Farve Område
White and the complete Tikkurila Symphony Colour Collection
Glans grad
Halvmat
Dækning
5-8 m2/l per coat.  
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Emballages størrelser
Base paint A: 0,9 l, 2,7 l, 9 l, 18 l.
Base paint C: 0,9 l, 2,7 l, 9 l.
Fortynder
Vand
Påførings metode
Brush, roller or spray application. Thinning: if necessary thin by up to 5% with water.
Tørretid ved 23°C og 50% relativ luftfugttighed
Normally touch-dry in two hours and recoatable after four hours.  Final hardness will be achieved after 2-3 days.
Vaskbarhed
>10 000 cycles (SFS 3755)
Kemisk bestandighed
Good (ISO 2812-1)
Varme bestandighed
85 °C (ISO 4211-2 and ISO 4211-3)
Tørstof volumen
Approx. 40 %
Densitet
1.2 kg/l, ISO 2811
Opbevaring
Protect from frost.
Produktkode
724/5_6001/3
MED-certifikat

PÅFØRING
Påførings-betingelser
The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %.
Forberedelse
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, all loose material and surface contamination. Use recommended Tikkurila products as cleaning agents and for mould removal. Use recommended Tikkurila fillers for filling cracks, nail holes, blemishes etc., and leveling of uneven surfaces. Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down. Ensure that all surfaces are thoroughly prepared.
Grunding
Prime unpainted wall and ceiling surfaces overall and spot prime all bare areas on previously painted walls and ceilings with Feelings Universal Primer.
Prime all bare wood with Unica Adhesion Primer and bare metal surfaces with Unica Metal Primer.
In areas of high humidity walls and ceilings should be primed with Feelings Moisture Stop prior to the application of Feelings Universal Primer and/or Feelings Extra Durable.
Male
Stir the paint thoroughly and apply two coats of Feelings Extra Durable overall.
Rengøring af værktøj
Clean with water immediately after use. Tikkurila Pensselipesu (Tool cleaner) is recommended for removing hardened paint.
EU VOC 2004/42/EC-limit værdi
(cat A/a) 75g/l (2007)/ 30g/l(2010). Feelings Extra Durable Semi-matt contains VOC max. 75g/l.

SUNDHED OG SIKKERHED KLASSIFICERING
The product is not classified as dangerous. A Material Safety Data Sheet is available on request.
Material Safety Data Sheet - Feelings Extra Durable

MILJØBESKYTTELSE OG BORTSKAFFELSE AF AFFALD
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
VAK/ADR: not classified
ssa130308 / ars200308 / mpy251005 / 724-