Tikkurila worldwide
Tikkurila PRODUCT DATA SHEET
13.01.2006

Merit 20, 30, 80

Coatings
MED
BESKRIVELSE A two-component acid catalysed lacquer.
PRODUKTEGENSKABER An all-round lacquer with good filling properties.
ANBEFALEDE ANVENDELSER Recommended for furniture, doors and other similar wooden surfaces.

TEKNISKE DATA
Egenskaber Merit 30 has MED Approval (0809-MED-0395). It can be used for lacquering interior furniture and other wooden components inside the ships.
Glans grupper Halvmat, Halvblank og Blank
Glans målestandard ISO 2813/60º
Emission klassifikation Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0.12 mg/m3 air.
Dækning

Recommended spreading amounts (thinned 10 %)

Theoretical coverage

wet / one layer

theoretical dry film thickness

 

 90 g/m2

40 µm

10 - 11 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Fortynder 1027 og 1033
Blandingsforhold Lacquer 100 parts by volume 005 2701, 2703, 2704
Hardener 10 parts by volume 006 2098
Påførings metode

Application technique

Viscosity DIN4

Low pressure spraying

18 - 23 s

Airless spraying

25 - 30 s

Curtain coating

30 - 45 s

Pot-life (+23°C) 48 hours.
Tørretid

(110 - 120 g/m2)

50 ºC

70 ºC

Dry to sand, after

30 - 40 min

20 - 30 min

Dry to stack, after

60 - 70 min

40 - 50 min

Stacking temperature below 35 ºC.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Tørstof volumen 49 volume %
56 weight %.
Densitet 1,0 kg/l.
Produktkode 005 2701, 2703 and 2704
MED-certifikat VTT-C-4029-15-09 Merit 30

PÅFØRING
Påførings-betingelser The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
Behandling Stir the lacquer carefully before use. Add 10 volume % of Hardener 006 2098. Thin the lacquer to the viscosity required. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. In case the lacquer mixture is used on the next day, add at least an equal amount of fresh mixture.
Rengøring af værktøj Thinner 1033 or 1027.
EU VOC 2004/42/EC-limit værdi The Volatile Organic Compounds amount is 440 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 524 g/l.

SUNDHED OG SIKKERHED KLASSIFICERING
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
ProduktsikkerhedsdatabladMERIT 80, 30, 20 [DK]
FortyndersikkerhedsdatabladTHINNER 1033 [DK]
HærdersikkerhedsdatabladHARDENER 2098 [DK]
 
-

Ovenstående oplysninger er baseret på laboratorieforsøg og praktisk erfaring, og er gældende på datoen hvor dette datablad er trykt. Kvaliteten af produktet sikres ved vores operative system, baseret på kravene i ISO 9001 og ISO 14001. Som producent kan vi ikke være ansvarlig for eventuelle skader forårsaget ved brug af produktet mod vore anvisninger eller ved brug til uegnede formål.

Tilbage