Akvilac Topas 20, 40 (Akvi Topas 20, 40) |
|
| BESKRIVELSE |
Waterborne polyurethane-acrylate lacquer. |
| PRODUKTEGENSKABER |
A fast drying and durable waterborne laqcuer for high demands in interior use. |
| ANBEFALEDE ANVENDELSER |
Suitable for furniture, doors, mouldings, floors and other wooden surfaces. |
|
| TEKNISKE DATA |
| Glans grupper |
Halvblank og Halvmat |
| Glans målestandard |
ISO 2813/60º |
| Emission klassifikation |
The lacquer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment. |
| Dækning |
|
Recommended spreading amounts (unthinned)
|
Theoretical coverage
|
|
wet
/ one layer
|
theoretical
dry film thickness
|
|
|
120 g/m2
|
40
µm
|
8
- 9 m2/l
|
|
| Fortynder |
Vand |
| Påførings metode |
|
Application technique
|
Viscosity DIN4
|
|
Low pressure spraying
|
30 - 60 s
|
|
Airless spraying
|
30 - 60 s
|
|
Electrostatic spraying
|
30 - 60 s
|
|
| Tørretid |
|
(100 -
120 g/m2)
|
20 ºC
|
50 ºC
|
70 ºC
|
IRM
|
|
Dry to sand, after
|
20 - 60 min
|
5 - 15 min
|
2 - 5 min
|
2 - 3 min
|
Stacking temperature below 35 ºC.
|
| Tørstof volumen |
Abt. 32 % by volume, 34 % by weight. |
| Produktkode |
005 3868 and 005 3869 |
|
| PÅFØRING |
| Påførings-betingelser |
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %. |
| Behandling |
Stir the lacquer carefully before use. Avoid flotation. For spray application thin the lacquer with water or Akvi Thinner if necessary. |
| Rengøring af værktøj |
Water |
| EU VOC 2004/42/EC-limit værdi |
The Volatile Organic Compounds amount is 130 g/litre of lacquer. Maximum VOC content in ready to use lacquer (thinned 10 % by volume) is 150g/litre.
|
|
| SUNDHED OG SIKKERHED KLASSIFICERING |
|
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
|
| Produktsikkerhedsdatablad | AKVILAC TOPAS 40, 20 (former AKVI TOPAS 40, 20, 10) [DK] |
| |
| - |
|
Ovenstående oplysninger er baseret på laboratorieforsøg og praktisk erfaring, og er gældende på datoen hvor dette datablad er trykt. Kvaliteten af produktet sikres ved vores operative system, baseret på kravene i ISO 9001 og ISO 14001. Som producent kan vi ikke være ansvarlig for eventuelle skader forårsaget ved brug af produktet mod vore anvisninger eller ved brug til uegnede formål.
Tilbage
