 |
PRODUCT DATA SHEET 22.02.2010 |
|||||||||||||||||||||
Temadur 90 |
 |
|||||||||||||||||||||
| BESKRIVELSE | A two component, glossy polyurethane paint, hardener aliphatic isocyanate. | |||||||||||||||||||||
| PRODUKTEGENSKABER | Recommended as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress. | |||||||||||||||||||||
| ANBEFALEDE ANVENDELSER | Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment. | |||||||||||||||||||||
| TEKNISKE DATA | ||||||||||||||||||||||
| Egenskaber | Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention. | |||||||||||||||||||||
| Farve kort | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||||||
| Glans grupper | Helblank | |||||||||||||||||||||
| Dækning |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||||||
| Fortynder | 1048, 1067 og 1061 | |||||||||||||||||||||
| Blandingsforhold | Base 5 parts by volume 115-series
Hardener 1 part by volume 008 7590 |
|||||||||||||||||||||
| Påførings metode | By airless or conventional spray or by brush. | |||||||||||||||||||||
| Pot-life (+23°C) | 4 hours | |||||||||||||||||||||
| Tørretid |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||||||
| Tørstof volumen | 55 ± 2 volume % (ISO 3233)
68 ± 2 weight % |
|||||||||||||||||||||
| Densitet | 1.2 ± 0.1 kg / l (mixed) | |||||||||||||||||||||
| Produktkode | 115-series | |||||||||||||||||||||
| PÅFØRING | ||||||||||||||||||||||
| Påførings-betingelser | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||||||
| Forberedelse | Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) | |||||||||||||||||||||
| Grunding | Temacoat GPL-S Primer, Temacoat GF Primer, Temacoat HB Primer, Temacoat PM Primer, Temacoat GPL-S MIO, Temacoat RM 40, Temacoat SPA, Temamastic PM 100, Temabond, Temadur 20, Temadur Primer, Temaprime GF, Fontecoat EP Primer and Fontecryl 10. | |||||||||||||||||||||
| Toplak | Temadur and Temathane. | |||||||||||||||||||||
| Male | By airless or conventional spray or by brush. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the temperature of the components (base, hardener, thinner) the paint can be thinned 10 - 22 %. The viscosity should be 20 - 25 s DIN4. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. At brush application the paint should be thinned according to the circumstancies. | |||||||||||||||||||||
| Blanding af komponenter | First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing. | |||||||||||||||||||||
| Rengøring af værktøj | Thinner 1048, 1067 or 1061. | |||||||||||||||||||||
| EU VOC 2004/42/EC-limit værdi | The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
VOC content of the paint mixture (thinned 22 % by volume) is 495 g/l. Only for industrial use. |
|||||||||||||||||||||
| SUNDHED OG SIKKERHED KLASSIFICERING | ||||||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. | ||||||||||||||||||||||
| Produktsikkerhedsdatablad | TEMADUR 90 [DK] | |||||||||||||||||||||
| Fortyndersikkerhedsdatablad | THINNER 1048 [DK] | |||||||||||||||||||||
| Hærdersikkerhedsdatablad | TEMADUR HÆRDER 008 7590 [DK] | |||||||||||||||||||||
| - | ||||||||||||||||||||||
Ovenstående oplysninger er baseret på laboratorieforsøg og praktisk erfaring, og er gældende på datoen hvor dette datablad er trykt. Kvaliteten af produktet sikres ved vores operative system, baseret på kravene i ISO 9001 og ISO 14001. Som producent kan vi ikke være ansvarlig for eventuelle skader forårsaget ved brug af produktet mod vore anvisninger eller ved brug til uegnede formål.
