Tikkurila worldwide
Tikkurila PRODUCT DATA SHEET
03.05.2006

Temacryl EA 50

BESKRIVELSE A two component, semigloss, non-isocyanate acrylic finish.
PRODUKTEGENSKABER Recommended as a semigloss topcoat for epoxy systems exposed to weathering and/or chemical stress.
ANBEFALEDE ANVENDELSER Recommended for storage tank exteriors, steel masts, haulage equipment, structural steel and other steelwork, machinery and equipment.

TEKNISKE DATA
Egenskaber A durable, non-chalking and easy to clean topcoat with good gloss and colour retention. Excellent weathering and abrasion resistance.
Farve kort RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
Glans grupper Halvblank
Dækning

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

80 µm

12.5 m2/l

60 µm

120 µm

8.3 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Fortynder 1048
Blandingsforhold Base 3 parts by volume 515-series
Hardener 2 parts by volume 008 7650
Påførings metode By airless or conventional spray.
Pot-life (+23°C) about 30 hours
Tørretid

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

1 h

15 min

10 min

Touch dry, after

10 h

4 h

2 h

Recoatable, after

14 h

6 h

3 h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Tørstof volumen 50 ± 2 % volume (ISO 3233)
62 ± 2 % weight
Densitet 1.2 ± 0.1 kg / l (mixed)
Produktkode 515-series

PÅFØRING
Påførings-betingelser All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Forberedelse Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Grunding TEMACOAT GPL-S PRIMER, TEMACOAT GF PRIMER, TEMACOAT HB PRIMER, TEMACOAT RM 40, TEMABOND, TEMASIL 90, TEMAPRIME EE, TEMAPRIME GF and FONTECRYL 10.
Toplak TEMACRYL EA.
Male By airless or conventional spray. At airless spray application the paint can be thinned 10 - 20 % to a viscosity of 30 - 60 s DIN4. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. In order to reach a tight, even finish for spray application a "wet-on-wet" technique is recommended: first a thin coat and after the solvents have evaporated for 5 - 20 minutes the final coat.
Blanding af komponenter First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
Rengøring af værktøj Thinner 1048 or 1006.
EU VOC 2004/42/EC-limit værdi The Volatile Organic Compounds amount is 480 g/litre of paint mixture.
VOC content of paint mixture (thinned 20 % by volume) is 550 g/l.

SUNDHED OG SIKKERHED KLASSIFICERING
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
ProduktsikkerhedsdatabladTEMACRYL EA 50.
 
-

Ovenstående oplysninger er baseret på laboratorieforsøg og praktisk erfaring, og er gældende på datoen hvor dette datablad er trykt. Kvaliteten af produktet sikres ved vores operative system, baseret på kravene i ISO 9001 og ISO 14001. Som producent kan vi ikke være ansvarlig for eventuelle skader forårsaget ved brug af produktet mod vore anvisninger eller ved brug til uegnede formål.

Tilbage