 |
PRODUCT DATA SHEET 23.03.2006 |
|||||||||||||||||||||
Temacoat GPL |
 |
|||||||||||||||||||||
| BESKRIVELSE | A two component, amine adduct cured epoxy finish. | |||||||||||||||||||||
| PRODUKTEGENSKABER | Used especially as a finishing coat in epoxy systems exposed to heavy abrasion and/or chemical stress. Also suitable for concrete floors. | |||||||||||||||||||||
| ANBEFALEDE ANVENDELSER | Recommended for bridges, tanks and different types of steelwork and equipment in the wood processing and chemical industries, such as tubular bridges, conveyors, paper machines etc. | |||||||||||||||||||||
| TEKNISKE DATA | ||||||||||||||||||||||
| Egenskaber | Withstands +150 ºC dry heat and + 60 ºC in immersion. Withstands immersion in dilute solutions of non-oxidizing acids, alkalis and salts. Resists only temporary splashes of oxidizing acids and bleaching solutions. Withstands chemically active gases and dust. Withstands immersion in mineral/vegetable/animal fats and oils. | |||||||||||||||||||||
| Farve kort | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||||||
| Glans grupper | Blank | |||||||||||||||||||||
| Dækning |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||||||
| Fortynder | 1031 | |||||||||||||||||||||
| Blandingsforhold | Base 3 parts by volume 170-series.
Hardener 1 part by volume 008 7580 |
|||||||||||||||||||||
| Påførings metode | By airless spray or brush. | |||||||||||||||||||||
| Pot-life (+23°C) | 5 hours | |||||||||||||||||||||
| Tørretid |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||||||
| Tørstof volumen | 55 ± 2 volume % (ISO 3233)
68 ± 2 weight % |
|||||||||||||||||||||
| Densitet | 1.3 - 1.4 kg / l (mixed) depending on colour. | |||||||||||||||||||||
| Produktkode | 170-series. | |||||||||||||||||||||
| PÅFØRING | ||||||||||||||||||||||
| Påførings-betingelser | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +10 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||||||
| Forberedelse | Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Concrete surfaces: The surface must be dry and at least 4 weeks old. The relative humidity of the concrete should not exceed 97%. Remove any splashes and unevennesses by grinding. Remove laitance and form oil from concrete castings by sanding or blast cleaning. Any cracks, crevices and voids must be repaired with a mixture of TEMAFLOOR 200 and fine dry quartz sand. |
|||||||||||||||||||||
| Grunding | TEMACOAT GPL-S PRIMER, TEMACOAT GF PRIMER, TEMACOAT HB PRIMER, TEMACOAT PM PRIMER, TEMACOAT GPL-S MIO, TEMACOAT SPA, TEMALINE LP PRIMER, TEMAMASTIC PM 100, TEMABOND and FONTECOAT EP PRIMER. | |||||||||||||||||||||
| Toplak | TEMACOAT GPL. | |||||||||||||||||||||
| Male | By airless spray or brush. At spray application the paint should be thinned 5 - 15 %. Airless spray nozzle tip 0.011" - 0.017" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
At brush application the paint can be thinned according to the circumstancies. |
|||||||||||||||||||||
| Blanding af komponenter | First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing. | |||||||||||||||||||||
| Rengøring af værktøj | Thinner 1031. | |||||||||||||||||||||
| EU VOC 2004/42/EC-limit værdi | The Volatile Organic Compounds amount is 430 g/litre of paint mixture.
VOC content of the paint mixture (thinned 15 % by volume) is 495 g/l. |
|||||||||||||||||||||
| SUNDHED OG SIKKERHED KLASSIFICERING | ||||||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||||||
| Produktsikkerhedsdatablad | TEMACOAT GPL [DK] | |||||||||||||||||||||
| Fortyndersikkerhedsdatablad | THINNER 1031 [DK] | |||||||||||||||||||||
| Hærdersikkerhedsdatablad | TEMACOAT GPL HÆRDER - 008 7580 [DK] | |||||||||||||||||||||
| - | ||||||||||||||||||||||
Ovenstående oplysninger er baseret på laboratorieforsøg og praktisk erfaring, og er gældende på datoen hvor dette datablad er trykt. Kvaliteten af produktet sikres ved vores operative system, baseret på kravene i ISO 9001 og ISO 14001. Som producent kan vi ikke være ansvarlig for eventuelle skader forårsaget ved brug af produktet mod vore anvisninger eller ved brug til uegnede formål.
